Residential · Las Vegas, NV
When old coatings peel, bubble, or trap stains, the fix is professional epoxy removal and a properly bonded recoat, not another layer on top. Elite Epoxy Las Vegas has served Las Vegas since 2015, removing failed epoxy, grinding to clean concrete, and rebuilding floors with industrial-grade primers, base coats, and topcoats.
We start with a site check to identify what you have now (epoxy, polyaspartic, urethane, paint, glue, or sealer), measure moisture risk, and map cracks, oil contamination, and tire pickup. Most projects are removed with diamond grinding using HEPA dust extraction, then detailed at edges with hand grinders so the entire slab profile is consistent. After removal, we degrease and rinse as needed, repair spalls and cracks with epoxy patch and polyurea joint filler, then establish the right Concrete Surface Profile (typically CSP 2-3 for coatings) before primer goes down.
Las Vegas heat and big day to night swings can accelerate hot-tire pickup and make low-quality coatings yellow or soften, so we build the system for UV and temperature, not just gloss. Depending on traffic and use, we recoat with moisture-mitigating epoxy primer, 100 percent solids epoxy base, and a UV-stable polyaspartic or polyurethane topcoat in your target sheen (satin, semi-gloss, gloss). For traction, we broadcast aluminum oxide or polymer grit into the topcoat; for design, we install full or partial flake broadcast, quartz, or solid-color pigment. Cure time and return-to-service are planned around your schedule, with clear limits for vehicle parking and chemical exposure.
Customers across Las Vegas choose us because we treat recoats as a concrete prep problem first, not a paint job. Our crews use commercial grinders, calibrated diamond tooling, and true HEPA vacuums to control dust and achieve repeatable bond strength, then apply materials at the right mil thickness with notched squeegees and back-rolling. We are licensed and insured, provide free written estimates, and explain options in plain terms, including what failed previously and how we prevent repeat issues like fisheyes, delamination, and peeling at saw cuts.
At the end, we walk the floor with you and check edges, control joints, drains, and transitions for uniform coverage and clean lines. You get a documented scope of work, product system details, care instructions (cleaners to use and avoid), and a realistic maintenance plan for garages, shops, warehouses, and commercial kitchens. If your project needs striping, safety yellow markings, ADA slip resistance guidance, or chemical-resistant topcoats for oils and cleaners, we confirm those requirements before we leave. The result is a fully removed, properly prepped, and professionally recoated floor that bonds to the slab and holds up under real traffic.
Yes. We provide a free written estimate after a quick review of the slab condition, square footage, and the coating system you want.
Yes. We route and fill cracks with epoxy crack filler or epoxy mortar as appropriate, then grind flush so the coating system has a stable substrate.
They can be when wet if the finish is smooth and glossy. We can add traction additives to the topcoat and recommend the right texture level for garages, patios, pool decks, and commercial spaces.
Yes. Metallic epoxy uses pigment powders and controlled movement techniques to create marbling and depth, then it is protected with a clear topcoat selected for wear and UV exposure.
Most installs include diamond grinding, crack and spall repairs as needed, an epoxy primer or base coat, optional full flake broadcast, and a clear UV-stable polyaspartic or urethane topcoat.
If your floor is peeling, flaking, or showing hot-tire pickup, epoxy removal is usually the only reliable path to a long-lasting recoating. Coatings fail when they are applied over weak concrete, moisture vapor, oil contamination, or a surface that was not ground to the right profile. Elite Epoxy Las Vegas removes failed epoxy and rebuilds floors with a complete system, from primer to UV-stable topcoat, so the new coating bonds to clean, sound concrete.
Not all “removal” is the same. We determine whether your existing layer is epoxy, acrylic paint, urethane, polyaspartic, or a failing sealer, then choose the best method, typically mechanical removal with diamond tooling rather than harsh chemical stripping. Grinding also reveals hidden issues like laitance, old adhesive, overspray, or soft concrete that would cause a new coating to delaminate. After the slab is opened up, we clean, profile, and repair so the recoating is built on a stable base.
For the recoating, we match the system to the space. Garages often get an epoxy base with a full flake broadcast and a polyaspartic topcoat for abrasion and UV stability. Commercial floors may need thicker build, chemical resistance, and added traction in wet zones, along with cove base or cleanable transitions. We control film build, broadcast rate, and topcoat coverage to avoid thin spots, roller marks, and premature wear in turning lanes and parking areas.
You will receive a free written estimate, a straightforward scope, and care guidance so the finish lasts. If your current floor is failing, send photos and details about traffic, chemicals, and exposure, and we will recommend the correct epoxy removal and recoating plan for your property.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Las Vegas. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
