Residential · Las Vegas, NV
Flake epoxy flooring is the fastest way to upgrade a garage, shop, or showroom with a clean, speckled finish that hides tire marks and dust. Elite Epoxy Las Vegas has served Las Vegas since 2015, installing and repairing full-broadcast flake systems for homes and commercial spaces.
Prep and base coat decide whether flake epoxy lasts. We start by checking the slab for contamination, laitance, spalling, and moisture vapor, then diamond-grind with a HEPA vacuum to a CSP profile that matches the system. Cracks and control joints get routed, cleaned, and repaired with epoxy crack filler or polyurea, then we patch low spots so the floor lays flat. Next comes a pigmented 100 percent solids epoxy base coat, applied by squeegee and back-roll for even film build and proper wetting into the concrete pores.
Las Vegas heat, dusty winds, and hot tires can punish coatings, so the topcoat is not an afterthought. After the base coat, we broadcast vinyl color flakes to rejection (full coverage) or to a partial blend, then scrape and vacuum loose flake, and sand to knock down sharp edges for a comfortable, cleanable surface. For the finish, we install a clear polyaspartic or aliphatic polyurethane topcoat chosen for UV stability, chemical resistance, and hot-tire pickup resistance, with optional aluminum-oxide anti-slip additive for safer traction. We also detail stem walls, steps, and cove bases when needed, and we cut clean expansion joints so the system moves without tearing.
Customers choose us because the work is controlled, documented, and repeatable, not rushed. Our crews are licensed and insured, show up with commercial grinders, dust control, calibrated mixing, and moisture testing tools, and we follow manufacturer install windows for recoat times, temperature, and humidity. You get straight answers on what can and cannot be coated, what repairs are required first, and whether an epoxy base with polyaspartic topcoat or a faster full-polyaspartic build is the best fit for your use. If you need repair, we can blend new flake into existing areas, re-topcoat worn sections, and fix peeling spots by grinding back to sound concrete instead of just painting over failure.
After installation, we walk the floor with you and confirm coverage, texture, edge details, and clean terminations at doors and drains. You receive written scope, product selections, color-flake blend choices, and simple care instructions (neutral cleaner, soft bristle, no harsh degreasers) plus realistic cure times for foot traffic and vehicles based on the topcoat used. We can add striping for commercial bays, safety colors, and easier cleaning zones, and we can schedule touch-ups for high-wear areas like turn zones and under kickstands. If you are comparing bids, ask for the prep method, CSP target, moisture limits, and topcoat type, those details are what you are buying.
Yes. We provide a free written estimate after a quick review of the slab condition, square footage, and the coating system you want.
Yes. We route and fill cracks with epoxy crack filler or epoxy mortar as appropriate, then grind flush so the coating system has a stable substrate.
They can be when wet if the finish is smooth and glossy. We can add traction additives to the topcoat and recommend the right texture level for garages, patios, pool decks, and commercial spaces.
Yes. Metallic epoxy uses pigment powders and controlled movement techniques to create marbling and depth, then it is protected with a clear topcoat selected for wear and UV exposure.
Most installs include diamond grinding, crack and spall repairs as needed, an epoxy primer or base coat, optional full flake broadcast, and a clear UV-stable polyaspartic or urethane topcoat.
Flake epoxy flooring is a multi-layer concrete coating system built for daily wear, tire traffic, and easy cleanup in garages, warehouses, retail spaces, and back-of-house areas. Elite Epoxy Las Vegas installs new full-broadcast flake floors and repairs failing coatings by correcting the cause, not covering it up. The result is a durable, decorative surface with a consistent texture and a sealed topcoat that resists staining from oil, chemicals, and rubber.
A quality flake epoxy floor starts with concrete prep and moisture control. We diamond-grind to the right concrete surface profile, repair cracks and spalls with epoxy or polyurea fillers, and address weak or contaminated slabs before coating. If moisture vapor transmission is too high, we recommend a mitigation primer or an alternate system so the coating does not blister or delaminate later. For repairs, we grind back to sound material, feather transitions, and rebuild the base, flake broadcast, and clear coat so the patch performs like the surrounding floor.
After the flake broadcast, we scrape and vacuum excess, then sand for a flatter feel and easier mopping. Your finish coat is selected based on how you use the space: polyaspartic for faster return to service and UV stability, or aliphatic polyurethane for a tough, abrasion-resistant wear layer. Texture can be adjusted from smooth to more aggressive traction, and we can include cove base details for wash-down areas and commercial sanitation needs.
If you want flake epoxy flooring that looks consistent and holds up to hot tires, rolling loads, and daily cleaning, start with a written scope that lists prep, materials, and topcoat. Share your current floor condition and how the space is used, and we will provide a clear plan, flake blend options, and a free written estimate to get your project scheduled.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Las Vegas. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
